The color heat-shrinkable insulating tube
The color heat-shrinkable insulating tube is a special polyolefin material heat-shrinkable tube. It has a wide range of applications in various wiring harnesses, solder joints, insulation protection of inductors, and anti-rust and anti-corrosion of metal pipes and rods.
The color heat-shrinkable insulating tubes of Suzhou Fibo can be divided into three types according to the voltage level: 1 kV, 10 kV and 35 kV. There are many color of red, green, yellow, blue, black, brown and red. There are other color requirements can also be customized on demand. The length can be cut as required.
In terms of wall thickness, the wall thickness of colored insulating tubes of different grades and specifications is also different. The 1kv color heat-shrinkable insulating tube is thinner than the 10kv tube, and the 35kv tube will be thicker. The thicker the wall, the greater the weight. Prices will also vary.
The main function of the color heat-shrinkable insulating tube is, of course, insulation protection. It has a wide range of functions such as anti-corrosion, anti-acid, anti-leakage (insulation) and anti-leakage.
The method of using the color heat-shrinkable insulating tube is very simple. Move one end of the insulated pipe sheathed cable to a certain position, use heating tools such as a heat gun, oven or hair dryer. During the heating process, heat from one side to the other, or start from the middle and then heat to both ends. This can avoid Air remains in the insulation tube of the heat-shrinkable tube. After shrinking, wrap the cable tightly. Do not heat too close to the surface of the casing or concentrate in one place, otherwise it will cause uneven thickness or burn the casing.