Pattern heat shrink tubing, referred to as pattern tubing, is a type of heat shrink tubing made of cross-linked polyolefin material. Because of its beautiful texture on the surface, it has an anti-slip effect, so it is also called anti-skid pattern tube. Patterned tubes can be customized in a variety of colors, such as black, red, blue, yellow, green, etc. (Other sizes and cut tubes can be customized according to customer needs).

Anti-skid pattern heat shrink tubing  is a new type of anti-corrosion insulation material that uses polyolefin as the base material and adds various additives. It is mixed, formed, irradiated with electron beams or Co60, and finally expanded and stretched.

Product features:

Shrinkage ratio 1.8:1

Sweat-absorbent and anti-slip

Good shock absorption properties

Protect fishing rod handles from lightning strikes

Patterned tube products are widely used on the grips of fishing rods, rackets, paddles and hand tools, replacing the traditional methods of EVA foam and PU wrapping tape to avoid multiple sizes and the possibility of loosening. NS2 patterned pipe has good texture. The fluffy surface can increase friction to achieve anti-slip performance. The high-performance insulation material can protect against the possibility of electric shock and enhance the safety of outdoor users.

In addition to being widely used in the sports fishing tackle industry, anti-skid pattern heat shrink tubing can also be used in pipeline anti-corrosion.

(1) Anti-corrosion at the junction of buried pipes and outgoing pipes such as pressure regulating boxes, pressure regulating cabinet inlet and outlet pipes, and building introduction pipes.

(2) Use heat shrinkable flange sleeves to prevent corrosion at the connection point between the directly buried valve and the underground pipeline flange.

(3) Anti-corrosion of buried steel pipelines at ends, tees, reducers and flange blind plates, as well as interface welding repair openings and repairs.

(4) Anti-corrosion of gas pipelines in casing when steel gas pipelines cross railways, important rivers, and major urban arteries.

(5) Anti-corrosion of indoor steel gas pipelines when passing through walls and floors.

(6) When overhead air-pressure gas pipelines adjacent to important public buildings and overhead air-pressure gas pipelines are close to buildings or structures, heat shrinkable tube anti-corrosion may be considered instead of general paint anti-corrosion.

(7) Buried gas pipelines use two or three layers of polyethylene as sealing and damage repair materials for anti-corrosion. Use two or three layers of polyethylene as sealing and damage repair materials for anti-corrosion.

The use of radiation cross-linked heat shrinkable tubes for anti-corrosion has many advantages: good sealing performance, high peel strength and mechanical strength; good insulation and anti-corrosion properties, with few defects such as pores and pinholes; uniform shrinkage without curling or cracking; on-site operation It is simple and safe to use; when repairing, it can be repaired along with welding, and the construction progress will not be affected by the repairing speed.